Search resultsProducts found: 75

Spike .625" X 2" X 6" Hardened Wear Pad 

200-SPK-0200

Quick change spike is 5/8" thick by 2-1/4" wide by 6" long. This quick change spike has a hardened wear pad (52-56 HRC) for extra life.

Spike  .625" X 2" X 6" With Extended Wear Pad

SPIKE Fits: 200 Series Speed-Loc™ Installation Driver: 400-DRV-1000 Size: 5/8″ (15mm) thick by 2-1/4″ (57mm) wide by 6″ (150mm) long. 

This quick change spike has a hardened wear pad (52-56 HRC) that extends to the top of the stem to prevent wear in abrasive soil or when working at greater depths. 

 The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.

Spoon Opener .313"(8MM) X 2.25"(57MM)   - Blue Armour

These spoons have a 2” (51 mm) spread. Available in 1/4” (6 mm) material (200-SPN-0200) or 5/16” (8 mm) material for increased wear life (200-SPN-0208).

Spoon Opener .313"(8MM) X 3"(76MM)   - Blue Armour (Clay)

These spoons have a 2″ (51 mm) or 3″ (76 mm) spread. Available in 1/4″ (6 mm) material (200-SPN-0300) or 5/16″ (8 mm) material (200-SPN-0308) for increased wear life.

Tip .75" QC Long Nose Carbide

tip with extra long carbide on the nose for highly abrasive conditions.

Tip 2" QC Carbide Front & Bottom

CARBIDE TIP SPREAD 2” (51mm) tip with carbide insert on the nose to fracture the ground. Carbide inserts on the underside of the wings to maintain a sharp cutting edge.

Tip 3" QC Carbide Front & Bottom (DALE)

CARBIDE SPREAD TIP 3” (76mm) tip with carbide insert on the nose to fracture the ground. Carbide inserts on the underside of the wings to maintain a sharp cutting edge.

Wedge Urethane 2 Degree Decrease Pitch

200-WDG-0206 This 2° urethane wedge has 45-80mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.

Wedge Urethane 5 Degree Decrease Pitch

200-WDG-0506 This 5° urethane wedge has 45-80mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks

Wedge Urethane 10 Degree Decrease Pitch

200-WDG-1006 This 10° urethane wedge has 45-80mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.

Seed Boot QC Attachment 6" SPREAD

300-ATM-1006 This spreader attachment will distribute the seed evenly in a 6″ (152mm) row. Seed spread may vary depending on sweep size, soil type and fan speed. Works well for organic operations because of the wide seed spread.

Seed Boot QC Attachment Straight

300-ATM-1020 This straight attachment will spread the seed approximately 2-1/2″ (63mm). It works well with the quick change spoons, spikes or any size of sweep.

Bolt & Nut Combo 300BLT4414 & 600NUT3754

300-BNC-4414 This bolt and nut secure the quick change seed boot attachments into the holders.

Driver for 200 & 410 Sweeps & Spoons

400-DRV-1000 This driver can be used when installing any of the quick change sweeps and spoons.

.75" Tip, Fits VOS (Versatile Opener System) Style Holders

SINGLE SHOOT TIP Overview: 3/4” (19 mm) long-wearing single shoot tip with long carbide insert on the nose for highly abrasive conditions. Packer Recommendation: 3/4” (19 mm) or wider. Fertilizer Options: Used for seeding only.

4" Tip Single Shoot Paired Row 3/4" Drainage Trench

CARBIDE TIP 4” (102mm) cast tip with carbide insert on the nose for excellent penetration and wear resistance.

QC Tip (Versatile Opener System) 4" Paired row - Fits Versatile Opener System Style Holder - Extra Carbide

4″ Paired Row Tip with ¾” Horizontal and ¾” Vertical Seed/Fertilizer Separation. Extra long carbide on the nose and narrow carbide on the cutting edges of the wings for excellent penetration.

Holder For Single shoot, (Tip Sold separately)

A narrow design allows for more accurate seed placement behind the tip. Extra hard surfacing on critical wear areas increases the life of the holder.

Horsch Granular Paired Row Holder

Hard facing is placed on critical wear points. The streamlined holder design reduces plugging and allows for better trash clearance

Holder For Versatile Opener System Tips

Fits: Horsch 84° shank Use the bottom two holes when installing this holder for standard installation. To add 4° more pitch, use the top two holes on the holder.

Wedge Adapter Cast For JD 1810 & 1820

880-WDG-0300 This cast wedge adapter is designed for our 047, 610 and 612 seeding openers on all John Deere shanks.

Wedge adapter Cast All CP Excluding JD1810 / 1820

880-WDG-0301 This cast wedge adapter is designed for our 047, 610 and 612 seeding openers on all 50° curved bottom shanks.

Niaux 200 Discs - 380mm x 4mm Pilot Hole Size 76mm

ACCORD Replaces OEM Part #: AC825821 Disc Type: Flat Dimensions: 380mm x 4mm Pilot Hole Size: 76mm # of Bolt Holes: 6 x 8.5mm