Tillage Parts

Seed Boot QC Attachment Straight

300-ATM-1020 This straight attachment will spread the seed approximately 2-1/2″ (63mm). It works well with the quick change spoons, spikes or any size of sweep.

C-Shank Holder For VOS - Versatile Opener System

This holder is part of the VOS (Versatile Opener System) which gives you the flexibility to choose the right tip and fertilizer tubes for your needs. Photo on the left is shown with 610-TIP-4081 and 880-TUB-1003. Components and tips sold separately

Niaux 200 Discs - 460mm x 4mm Pilot Hole Size - Flat

AMAZON Replaces OEM Part #: XL044 Disc Type: Concave (42mm) 20 Notches Dimensions: 460mm x 4mm Pilot Hole Size: Flat # of Bolt Holes: 4 x 10.5mm

Wedge adapter Cast All CP Excluding JD1810 / 1820

880-WDG-0301 This cast wedge adapter is designed for our 047, 610 and 612 seeding openers on all 50° curved bottom shanks.

Adapter Speed-LOC Curved 50Deg 2.25"(57MM)C-C  (KEV)

Speed-Loc™ Adapters fit a variety of machines and make it easy to change between BTT openers, fertilizer knives, sweeps and spikes.

Tip 2" QC Carbide Front & Bottom

CARBIDE TIP SPREAD 2” (51mm) tip with carbide insert on the nose to fracture the ground. Carbide inserts on the underside of the wings to maintain a sharp cutting edge.

Niaux 200 Discs - 620mm x 6mm pilot Hole Size - Flat

KOCKERLING Replaces OEM Part #: 912032 Disc Type: Concave (68mm) Dimensions: 620mm x 6mm Pilot Hole Size: Flat # of Bolt Holes: 4 x 12.5mm

Wedge Adapter Cast For JD 1810 & 1820

880-WDG-0300 This cast wedge adapter is designed for our 047, 610 and 612 seeding openers on all John Deere shanks.

QC Tip (Versatile Opener System) 4" Paired row - Fits Versatile Opener System Style Holder - Extra Carbide

4″ Paired Row Tip with ¾” Horizontal and ¾” Vertical Seed/Fertilizer Separation. Extra long carbide on the nose and narrow carbide on the cutting edges of the wings for excellent penetration.

Sweep .313"(8MM)X 5.5"(140MM) W/ Hardened Wear Pad

• Precise Heat Treatment   • Long-Lasting Design   • Consistent Quality   • Innovative Speed-Loc™ Technology

Driver for 200 & 410 Sweeps & Spoons

400-DRV-1000 This driver can be used when installing any of the quick change sweeps and spoons.

Sweep .313"(8MM) X 11"(280MM)   - Blue Armour

• Precise Heat Treatment   • Long-Lasting Design   • Consistent Quality   • Innovative Speed-Loc™ Technology

Sweep .313"(8MM)X 4"(100MM) W/ Hardened Wear Pad

This sweep is designed mainly for fall tillage or deep working. It has a 3/8″ x 2″ hardened wear pad (52-56 HRC) which increases wear life.

050-KNH-0812 for C-Shank

SINGLE SHOOT OPENER - Starter Fertilizer w/ Seed Only

Holder For Versatile Opener System Tips

Fits: Horsch 84° shank Use the bottom two holes when installing this holder for standard installation. To add 4° more pitch, use the top two holes on the holder.

Sweep .313"(8MM) X 16"(420MM)   - Blue Armour

• Precise Heat Treatment   • Long-Lasting Design   • Consistent Quality   • Innovative Speed-Loc™ Technology

Knife No Tube.75" Carbide 410TIP0801 8MM Holder - Single Shoot Opener

This low disturbance opener is low in draft and provides easy pulling

Sweep .313"(8MM) X 14"(355MM)   - Blue Armour

• Precise Heat Treatment   • Long-Lasting Design   • Consistent Quality   • Innovative Speed-Loc™ Technology

Sweep .313"(8MM) X 9"(230MM) V-Wing 9.5MM With Hardened Wear Pad

The sweep has a 3/8″ x 2″ hardened wear pad (52-56 HRC) that extends up the entire stem which increases its wear life.

Tip .75" QC Long Nose Carbide

tip with extra long carbide on the nose for highly abrasive conditions.

Adapter (Euro) 50 Deg 65-80MM C-C Speed-LOC

Speed-Loc™ Adapters fit a variety of machines and make it easy to change between BTT openers, fertilizer knives, sweeps and spikes.

Sweep .313"(8MM) X 13"(330MM)   - Blue armour (KEV)

• Precise Heat Treatment   • Long-Lasting Design   • Consistent Quality   • Innovative Speed-Loc™ Technology

Sweep .313"(8MM) X 12"(305MM)   - Blue Armour

• Precise Heat Treatment   • Long-Lasting Design   • Consistent Quality   • Innovative Speed-Loc™ Technology

Seed boot holder 43&50 Degree Curved Shank  

300-HLD-5010 Fits: Any chisel plow shank except the Bourgault and the Morris LH755 shank Overview: 2-1/4″ (57mm) bolt hole spacing. The bolt hole section is curved. Notes: Use a hose clamp to secure the air hose into the seed boot holder.