Bourgault Adaptor

Bourgault Speed-Loc™ Adapters

Fits Many Brands

Speed-Loc™ Adapters fit a variety of machines and make it easy to change between BTT openers, fertilizer knives, sweeps and spikes.

Consistent Depth Control

The upper stop on the adapter ensures tillage or seeding tools are always running at the same depth.

Peace of Mind

Heat-treated cast adapters provide increased strength and wear resistance. The spring-loaded locking pin ensures the tools will stay securely in place in all conditions, and we back that up with a 100% guarantee.

Not Sure What Speed-Loc™ Adapters Fits your Machine?

Find your equipment and the adapter that’s required on the Speed-Loc™ Adapter Chart.

Assembly, Installation & Removal Questions?

See the Speed-Loc™ Guide or videos for expert advice on the quick-change system. 

Removing Products from the Speed-Loc™ Adapters?

Remember to use the Speed-Loc™ Release Tool to remove openers, sweeps and spikes from the adapters.

Need Replacement Parts or a Speed-Loc™ Driver?

Find the right Speed-Loc™ Accessories to install, remove and maintain the quick-change system.

200 SERIES SPEED-LOC™ ADAPTERS

200-QCA-4700

Fits: 47° Shanks, Bourgault and Ezee-On field cultivators, air seeders and air drills.

Bolt Hole Spacing: 1-3/4” (45mm) centre to centre

Bolts: 1/2” (12mm) Hex Head Bolts

200-QCA-4710

Fits: 47° Shanks, except Bourgault and Ezee-On

Bolt Hole Spacing: 1-3/4” (45mm) centre to centre

Bolts: For 7/16” (11mm) shank holes use oversized head plow bolts. For 1/2” (12mm) shank holes use regular plow bolts.

200-QCA-5000

Fits: 50° Shanks, Bourgault and Morris Concept 2000.

Bolt Hole Spacing: 2-1/4” (57mm) centre to centre

Bolts: 1/2” (12mm) Hex Head Bolts

Notes: Not recommended for primary tillage, use only for seeding.

200-QCA-5010

Fits: 50° Shanks, except Bourgault Chisel Plows, can be used on a 43° shank with the addition of a 7° wedge (100-WDG-0700). 

Bolt Hole Spacing: 2-1/4” (57mm) centre to centre

Bolts: 1/2” (12mm) Plow Bolts

Notes: Not recommended for deep, heavy tillage. 

200-QCA-5020

Fits: European built shanks

Bolt Hole Spacing: 63-80 mm centre to centre

Bolts: M12-Din608 10.9 Plow Bolts

200-QCA-5030

Fits: Horsch Shanks

Bolt Hole Spacing: 57mm centre to centre

Bolts: M12-Din608 10.9 Plow Bolts

410 SERIES SPEED-LOC™ ADAPTERS

410-QCA-5000

Fits: 50° Shanks on Bourgault chisel plows and Morris Concept 2000with 755 lb trip.

Bolt Hole Spacing: 2-1/4″ (57mm) centre to centre

Notes: On a Bourgault four-hole shank, the centre hole of the adapter should be plugged to protect the spring ball from NH3 gases when used as a NH3 applicator. When installing 410 Series Speed-Loc™ Adapters for use with NH3, fill the hole behind the spring ball with plumber’s putty to protect from degradation caused by NH3.

410-QCA-5010

Fits: 50° Shanks on all chisel plows except Bourgault, Morris Concept 2000 with 755 lb trip and some John Deere models. Can be used on a 43° shank with the addition of a 7° wedge (400-WDG-0700)

Bolt Hole Spacing: 1-3/4″ to 3″ (45-76mm) centre to centre slotted bolt hole spacing providing the ability to fit many different makes and models.

Notes: In rocky or abrasive conditions, the bottom nut may experience excessive wear or damage. This problem is alleviated by placing the bottom bolt in from the back of the shank and putting the nut inside the slot in front of the adapter.

410-QCA-5020

Fits: Lemken shanks

Bolt Hole Spacing: 1-3/4″ (45mm) centre to centre

Bolts: M12-DIN608 10.9 plow bolts

410-QCA-5060

Fits: Köckerling

Bolt Hole Spacing: N/A

Bolts: M12-DIN 608 12.9 plow bolts

410-QCA-5080

Fits: 50° Shanks on some older and current model John Deere 2410 and 2430 chisels plows, and Summers Superchisel

Bolt Hole Spacing: 2-1/4” (57mm) centre to centre

Bolts: For John Deere 1-1/4” shank use 1/2” x 3” Grade 8 Hex Head bolt prevailing torque lock nuts.

Notes: Bushing 880-BSH-2000 is required for installation on all John Deere shanks having the split bottom bolt hole (https://www.marketplace.farm/farm-machinery-parts-and-spares/tillage-machinery-parts/bourgault-tillage-tools/accessories/). Also required for Summers chisel ploughs.