Farm Machinery

Holder For Versatile Opener System Tips

Fits: Horsch 84° shank Use the bottom two holes when installing this holder for standard installation. To add 4° more pitch, use the top two holes on the holder.

Horsch Granular Paired Row Holder

Hard facing is placed on critical wear points. The streamlined holder design reduces plugging and allows for better trash clearance

Holder For Single shoot, (Tip Sold separately)

A narrow design allows for more accurate seed placement behind the tip. Extra hard surfacing on critical wear areas increases the life of the holder.

QC Tip (Versatile Opener System) 4" Paired row - Fits Versatile Opener System Style Holder - Extra Carbide

4″ Paired Row Tip with ¾” Horizontal and ¾” Vertical Seed/Fertilizer Separation. Extra long carbide on the nose and narrow carbide on the cutting edges of the wings for excellent penetration.

4" Tip Single Shoot Paired Row 3/4" Drainage Trench

CARBIDE TIP 4” (102mm) cast tip with carbide insert on the nose for excellent penetration and wear resistance.

.75" Tip, Fits VOS (Versatile Opener System) Style Holders

SINGLE SHOOT TIP Overview: 3/4” (19 mm) long-wearing single shoot tip with long carbide insert on the nose for highly abrasive conditions. Packer Recommendation: 3/4” (19 mm) or wider. Fertilizer Options: Used for seeding only.

C-Shank Holder For VOS - Versatile Opener System

This holder is part of the VOS (Versatile Opener System) which gives you the flexibility to choose the right tip and fertilizer tubes for your needs. Photo on the left is shown with 610-TIP-4081 and 880-TUB-1003. Components and tips sold separately

Driver for 200 & 410 Sweeps & Spoons

400-DRV-1000 This driver can be used when installing any of the quick change sweeps and spoons.

Seed boot holder 43&50 Degree Curved Shank  

300-HLD-5010 Fits: Any chisel plow shank except the Bourgault and the Morris LH755 shank Overview: 2-1/4″ (57mm) bolt hole spacing. The bolt hole section is curved. Notes: Use a hose clamp to secure the air hose into the seed boot holder.

Bolt & Nut Combo 300BLT4414 & 600NUT3754

300-BNC-4414 This bolt and nut secure the quick change seed boot attachments into the holders.

Seed Boot QC Attachment Straight

300-ATM-1020 This straight attachment will spread the seed approximately 2-1/2″ (63mm). It works well with the quick change spoons, spikes or any size of sweep.

Seed Boot QC Attachment 6" SPREAD

300-ATM-1006 This spreader attachment will distribute the seed evenly in a 6″ (152mm) row. Seed spread may vary depending on sweep size, soil type and fan speed. Works well for organic operations because of the wide seed spread.

Wedge Urethane 10 Degree Decrease Pitch

200-WDG-1006 This 10° urethane wedge has 45-80mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.

Wedge Urethane 5 Degree Decrease Pitch

200-WDG-0506 This 5° urethane wedge has 45-80mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks

Wedge Urethane 2 Degree Decrease Pitch

200-WDG-0206 This 2° urethane wedge has 45-80mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.

Tip 3" QC Carbide Front & Bottom (DALE)

CARBIDE SPREAD TIP 3” (76mm) tip with carbide insert on the nose to fracture the ground. Carbide inserts on the underside of the wings to maintain a sharp cutting edge.

Tip 2" QC Carbide Front & Bottom

CARBIDE TIP SPREAD 2” (51mm) tip with carbide insert on the nose to fracture the ground. Carbide inserts on the underside of the wings to maintain a sharp cutting edge.

Tip .75" QC Long Nose Carbide

tip with extra long carbide on the nose for highly abrasive conditions.

Spoon Opener .313"(8MM) X 3"(76MM)   - Blue Armour (Clay)

These spoons have a 2″ (51 mm) or 3″ (76 mm) spread. Available in 1/4″ (6 mm) material (200-SPN-0300) or 5/16″ (8 mm) material (200-SPN-0308) for increased wear life.

Spoon Opener .313"(8MM) X 2.25"(57MM)   - Blue Armour

These spoons have a 2” (51 mm) spread. Available in 1/4” (6 mm) material (200-SPN-0200) or 5/16” (8 mm) material for increased wear life (200-SPN-0208).

Spike  .625" X 2" X 6" With Extended Wear Pad

SPIKE Fits: 200 Series Speed-Loc™ Installation Driver: 400-DRV-1000 Size: 5/8″ (15mm) thick by 2-1/4″ (57mm) wide by 6″ (150mm) long. 

This quick change spike has a hardened wear pad (52-56 HRC) that extends to the top of the stem to prevent wear in abrasive soil or when working at greater depths. 

 The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.

Spike .625" X 2" X 6" Hardened Wear Pad 

200-SPK-0200

Quick change spike is 5/8" thick by 2-1/4" wide by 6" long. This quick change spike has a hardened wear pad (52-56 HRC) for extra life.

Spring Ball For Speed-LOC 200-QCA-5030

200-SLC-1039

Replacement spring ball for 200-QCA-5030 adapters.