Bulk Sodium hypochlorite 14/15% 20L (Pallet x 32)

Pallet of Unstabilised Sodium Hypochlorite 14/15% Size: 20L in NON-RETURNABLE Drums

NOTE: THIS PRODUCT CANNOT BE DELIVERED TO A DOMESTIC ADDRESS.

A strong commercial liquid sanitiser and disinfectant for routine use where any disinfectant is required.

Sodium Hypochlorite is a powerful biocide that is effective against a broad spectrum of bacteria. A complete disinfectant for all surfaces, Sodium Hypochlorite is praised for being a general all-purpose sterilant for dairy farm use, dairy equipment and a multitude of other environments. 

WARNING: THIS PRODUCT IS SUPPLIED IN A 20L CONTAINER, WHICH IS HEAVY WHEN FULL, AND THEREFORE REQUIRES CAREFUL HANDLING. PLEASE ENSURE THAT YOU ARE ABLE TO HANDLE THE CONTAINER SAFELY.

Uses:

With its low foaming formulation, Sodium Hypochlorite is ideal for:

• Hatcheries and Poultry Farms and Dairy Farms
• Livestock Housing and Greenhouses
• Dairy plants and refrigerated tankers
• Meat processing Abattoirs, packaging stations, food processing and storage depots
• Food vending for restaurants and hotels
• Removing cement and mortar splashes, moss and algae, light oil stains and grease from brickwork, paving, tiles and concrete
• Efflorescence can also be removed with Sodium Hypochlorite, however this product must not be used on limestone or marble as the chemicals will attack the surface.

Application:

• Ensure gloves, overalls, boots and goggles are worn at all times during the application of Red Label Hypochlorite.
• Protect any metal surfaces and paint-work before application with polythene sheets and tape. Remove any excess dirt, mortar and debris etc. from the area with a stiff yard brush.
• If you are cleaning down brickwork, make sure you saturate area with water to prevent damage to mortar.
• We recommend before commencing a full clean down, that you test the Hypochlorite first on an inconspicuous area, diluted 2:1 water to cleaner.
• For normal use, dilute between 2 and 4 parts water to 1 part cleaner. Apply using a low pressure hose or by brush and allow solution to stand for 10-15 minutes, making sure however that the area does not dry out and is scrubbed occasionally with a stiff yard brush.
• Rinse the area thoroughly with large amounts of water (Do not add water to the neat cleaner, always add the cleaner to the water). If the stains persist, repeat the process and/or use the cleaner undiluted, making sure to first test the neat cleaner on an inconspicuous area.
• When removing efflorescence, use a 4:1 water to cleaner dilution. Always use a plastic container for diluting this product.

DELIVERY IS NORMALLY 12 WORKING DAYS