Cart

Bulk Sodium hypochlorite 14/15% 20L (Bulk mi

Hover over an image to enlarge

£10.95
(£13.14 inc tax)
In stock
Our quantity discounts:
Quantity
32+
Price
£10.45
+

Minimum quantity for "Bulk Sodium hypochlorite 14/15% 20L (Bulk mi" is 20.

Sodium Hypochlorite is a basic steriliser about the farm, please note that this product is strong at 14/15%.

Sodium hypochlorite

Unstabilised Sodium Hypochlorite 14/15% Size: 20L in NON-RETURNABLE Drums

NOTE: THIS PRODUCT CAN ONLY ORDERED IN BULK QUANTITIES AND BE DELIVERED TO COMMERCIAL PREMISES.

A strong commercial liquid sanitiser and disinfectant for routine use where any disinfectant is required.

Chlorine source for shock treatment of pools and spas. Ideal for treatment of heavily used pools, particularly those which are installed indoors. Suitable for direct dosing or for dosage using injection equipment. Alkaline – tends to raise pool water pH.

WARNING: THIS PRODUCT IS SUPPLIED IN A 20L CONTAINER, WHICH IS HEAVY WHEN FULL, AND THEREFORE REQUIRES CAREFUL HANDLING. PLEASE ENSURE THAT YOU ARE ABLE TO HANDLE THE CONTAINER SAFELY.

DOSE INFORMATION (SWIMMING POOLS)

To obtain maximum benefit from Liquid Chlorine, the pH of the pool water should be maintained around 7.5 and between 7.2 and 7.6 at all times. Above pH 7.6 the value of chlorine will be reduced. Use 600ml Liquid Chlorine per 100 cubic metres of pool water (10 fl oz. to 10,000 gallons) to raise the free chlorine level by approximately 1.0 ppm. This daily dose rate is offered as a general guide for private pools. Heavily used pools and those maintained at higher temperatures may require increased dosage. Test for actual requirements by using a pool side kit or test strip - adjusting the dose rate as necessary to maintain a minimum free chlorine level of 2.0 ppm.

SHOCK DOSING (SWIMMING POOLS)

To achieve an increase in free chlorine of approximately 5.0 ppm, add 3 litres of Liquid Chlorine to 100 cubic metres pool water (50 fluid oz. to 10,000 gallons).

APPLICATION

For direct dosing, carefully transfer the required amount of Liquid Chlorine into a clean plastic container. Slowly pour the solution into the pool water near to the return inlets and rinse out container thoroughly after use.

MSDS (uPOc4ulPT0.pdf, 72 Kb) [Download]